Gas Burner

Contact Us

Henan Zhengzhou Mining Machinery Co., Ltd.

Qiaoloucaizhai Industrial Park, XingYang, Zheng Zhou, Henan - 450122, China

Mobile : +86-18937185591

Phone : +86-37155902868

Introduction :

  • According to the different coal heat value,the parameter in the table has slight changes.Required to provide the type of coal,gas, and its heat value when ordering this equipment.
  • Gas Burner is research and developing for rotary kiln that burning with single or various gas fuel, which not only ensure all the advantages and specificity of four-channel burner, but also enhance the application of burning. The burner have special structure and reasonable technical parameters, guarantee the gas fuel fully mixing with air, primary air and secondary air, which to ensure stronger heating intensity, higher burning efficiency, easier adjustment. Burner can be applicable for various metallurgy and chemical rotary kiln.

Our Advantage :

  • Stability flame with regular flame shapes, no phenomenon like fluctuation and sweep kiln liner, that will outstanding extend the life time of kiln liner.
  • Good mixing performance with gas fuel, primary air and secondary air, burning abundantly, that can be enhance heating intensity and reduce primary air proportion at same time, then will improve kiln capacity and reduce energy consumption.
  • No strong eddy between flame and bowl effect produced by flame cover, can avoid appearance of temperature peak and make evenly distribution of flame temperature, then effectively protect cylinder and guard plate of kiln inlet.
  • Due to more fully mixing with combustion air and fuel gas, the burning will be more quickly and fully, which will reduce the content of CO and NOX from kiln inlet, but also better for safety operating and realizing green production.
  • The nozzle has made by special material with advantages like heat-resistance and easy to change.
  • Simple operation and adjustment. When operating, erupt speed of each air pipe can be change via adjust sectional area, then will realize goals like adjustment of flame shape and strength.

Structure : Gas Burner is mainly composed with Pipe, Nozzle, Ignition device, Metal corrugated compensator, Butterfly valve, Pressure measurement and Protection layer etc.

The main features are:

  • Pipeline - From outside to inside respectively, the pipeline has consist of Axial wind channel, Swirling wind channel, Gas wind channel, central wind channel and ignition channel. And the ignition is just for igniting, so called four-channel burner.
  • Nozzle - Nozzle made by special material, spray mouth sectional area of axial wind channel, swirling wind channel and gas wind channel are adjustable, so that can adjust the spray speed of each channel. The nozzle is the key part to ensure flame shape.
  • Ignition Device - Located in the central wind channel, used for automatic igniting.
  • Metal Corrugated Compensator - Which is the key part to connect each channel, sealing and adjust flame shape, and allowed process axial movement with connected channel.
  • Butterfly Valve - Used for adjust air volume. Among in 5 valves, 3 used for adjusting flow rate of central wind, swirling wind and axial wind; another 2 manual valves used for adjusting flow rate of ignite gas and main gas.
  • Pressure Measurement - Used for indirectly indicate spray speed of burner wind mouth.
  • Protection Layer - Fireproof casting layer, which casting by the owner.


Air Valve Type DN400-DN700
Gas Valve Type DN300-DN600
Gas Pressure(Pa) 1200-1600
Usage magnesium Production Line,Cement Production Line
Application Burning System for Rotary kiln on industry fields like Power, Chemical, Metallurgy, Building material etc.